Fitxer:Arm and Mast of NASA Mars Rover Curiosity 533976main pia13981-43 full.jpg
Fitxer original (4.821 × 3.616 píxels, mida del fitxer: 2,34 Mo, tipus MIME: image/jpeg)
Aquest fitxer i la informació mostrada a continuació provenen del dipòsit multimèdia lliure Wikimedia Commons. Vegeu la pàgina original a Commons |
Resum
DescripcióArm and Mast of NASA Mars Rover Curiosity 533976main pia13981-43 full.jpg |
Français : Le mat et le bras porte-outils du rover martien MSL (Curiosity) de la NASA. English: Arm and Mast of NASA Mars Rover Curiosity
The arm and the remote sensing mast of the Mars rover Curiosity each carry science instruments and other tools for NASA's Mars Science Laboratory mission. This image, taken April 4, 2011, inside the Spacecraft Assembly Facility at NASA's Jet Propulsion Laboratory, Pasadena, Calif., shows the arm on the left and the mast just right of center. For scale, the white segment of the arm extending vertically from its connection to the rover body is about 0.6 meter (2 feet) long. A percussive drill and sample-handling system on the arm will prepare samples of fine powder taken from interiors of Martian rocks and deliver them to two analytical instruments inside the rover. The turret of tools at the end of the arm -- in the far left in this image -- also has a color camera, an element-identifying spectrometer, a scoop for collecting soil samples and a brush for cleaning rock surfaces. The circle in the white box at the top of the mast is the laser and telescope of an instrument that can zap a rock up to about 7 meters (23 feet) away and determine its composition from a spark generated by the laser. Just below that circle is the square opening for a wide-angle camera that is paired with a telephoto camera (the smaller square opening to the left) in the rover's primary scientific camera, which can take high-definition color video with both "eyes." Two stereo navigation cameras on the mast will provide three-dimensional information about the rovers surroundings for use in driving and planning other rover operations. Partway up the mast are sensors for the mission's weather station. JPL, a division of the California Institute of Technology in Pasadena, manages the Mars Science Laboratory Project for the NASA Science Mission Directorate, Washington. |
Data | Taken on 4 d'abril de 2011 |
Font | http://www.nasa.gov/mission_pages/msl/multimedia/gallery/pia13981.html |
Autor | NASA/JPL-Caltech |
Aquest fitxer ha estat catalogat per Jet Propulsion Lab dels Estats Units d'Amèrica per a l'Administració Nacional d'Aeronàutica i de l'Espai (NASA)en virtut identificat com a: ID del fitxer : PIA13981.Els ID dels fitxers i ID alternatius són traduïts de Photo ID .Aquesta etiqueta no indica l'estat dels drets d'autor de la imatge carregada. Cal un senyal de drets d'autor. Vegeu Commons:Sobre les llicències. Altres idiomes:
العربية ∙ беларуская (тарашкевіца) ∙ български ∙ català ∙ čeština ∙ dansk ∙ Deutsch ∙ English ∙ español ∙ فارسی ∙ français ∙ galego ∙ magyar ∙ հայերեն ∙ Bahasa Indonesia ∙ italiano ∙ 日本語 ∙ македонски ∙ മലയാളം ∙ Nederlands ∙ polski ∙ português ∙ русский ∙ sicilianu ∙ slovenščina ∙ Türkçe ∙ українська ∙ 简体中文 ∙ 繁體中文 ∙ +/− |
Llicència
Public domainPublic domainfalsefalse |
Aquest fitxer és en el domini públic perquè ha estat creat per la NASA. L'avís legal de la NASA diu que «el material de la NASA no està protegit per copyright si no es diu el contrari». (NASA copyright policy page o JPL Image Use Policy). | ||
Atenció:
|
Elements representats en aquest fitxer
representa l'entitat
image/jpeg
68e1944950c2a2f3976b69d09ea9837453ac6e29
2.449.089 byte
3.616 píxel
4.821 píxel
Historial del fitxer
Cliqueu una data/hora per veure el fitxer tal com era aleshores.
Data/hora | Miniatura | Dimensions | Usuari/a | Comentari | |
---|---|---|---|---|---|
actual | 10:06, 6 juny 2011 | 4.821 × 3.616 (2,34 Mo) | Pline |
Ús del fitxer
La pàgina següent utilitza aquest fitxer:
Metadades
Aquest fitxer conté informació addicional, probablement afegida per la càmera digital o l'escàner utilitzat per a crear-lo o digitalitzar-lo. Si s'ha modificat posteriorment, alguns detalls poden no reflectir les dades reals del fitxer modificat.
_error | 0 |
---|